Misc-R - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ MISC-R

COPIER > FUNCTION > MISC-R
SCANLAMP Light-up check of LED
Lv.1 Details To light up the LED for 3 seconds.
Use case When replacing the LED
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 3 seconds
CLM-PLTN Sampling of color copyboard read MTF VL
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When color copyboard reading is performed, the controller performs
sampling of the MTF value. This value is set in COPIER> ADJUST>
CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the Copyboard Glass.
2) Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> ADJUST> CCD> MTF2-M1 to 12, MTF2-S1 to 12
BWM-PLTN Sampling of B&W copyboard read MTF value
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When B&W copyboard reading is performed, the controller performs
sampling of the MTF value. This value is set in COPIER> ADJUST>
CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the Copyboard Glass.
2) Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> ADJUST> CCD> MTF2-M1 to 12, MTF2-S1 to 12
8
Service Mode > COPIER > FUNCTION > MISC-R
8 Service Mode > COPIER > FUNCTION > MISC-R
COPIER > FUNCTION > MISC-R
CLM-DF1 Sampling of clr front stream read MTF VL
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When color front side stream reading is performed, the controller
performs sampling of the MTF value. This value is set in COPIER>
ADJUST> CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the ADF.
2) Select the item, and then press OK key.
3) Perform color front side stream reading with the MTF chart set on
the ADF. (CLM-DF1)
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER > ADJUST > CCD > MTF2-M1 to 12, MTF2-S1 to 12
BWM-DF1 Sampling of B&W front stream read MTF VL
Lv.1 Details The MTF value for the Reader Unit is sometimes displaced from the
factory setting value depending on the condition at transportation/
storage. If the machine is installed without correcting the value, it
may cause an image failure such as moire. Therefore, it is necessary
to readjust the MTF value by reading the MTF adjustment chart at
installation.
When B&W front side stream reading is performed, the controller
performs sampling of the MTF value. This value is set in COPIER>
ADJUST> CCD> MTF2-Mx, MTF2-Sx.
Use case At installation
Adj/set/operate method 1) Set the MTF chart on the ADF.
2) Select the item, and then press OK key.
3) Perform B&W front side stream reading with the MTF chart set on
the ADF. (BWM-DF1)
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> ADJUST> CCD> MTF2-M1 to 12, MTF2-S1 to 12
8-108
8-108