2) Pull out the cables to the front, and connect the Signal Cable and the Power Supply Cable
to the Encryption Board.
x2
3) Install the Encryption Board.
• 4 Screws (TP; M3x6)
x4
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
4) Secure the Signal Cable and the Power Supply Cable in place using the 2 Wire Saddles at
the back of the HDD Case Unit.
5) Free the cables from the 3 Wire Saddles at the front.
F-9-450
F-9-451
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
x2
9-221
F-9-452
9-221