Check Items When Turning Off The Main Power; Removing The Hdd And Hdd Case Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.
Installation Procedure

■ Removing the HDD and HDD Case Unit

1) Push [A] part, and open the Right Rear Cover 1.
[A]
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
2) Remove the Side Cover.
• 1 Screw
• 2 hooks
3) Free the Reader Communication Cable and the Reader Power Supply Cable from the 2
Wire Saddles.
4) Remove the Left Rear Cover.
• 2 Protrusions
F-9-270
9 Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
Hook
Hook
F-9-271
x2
Protrusion
F-9-272
9-120
9-120