9)
Fit the Protrusions of the Cassette Heater Unit into the Holes of the Host Machine.
Hole
Protrusion
9
Installation > Cassette Heater Unit > Installation Procedure
Hole
Protrusion
F-9-119
9
Installation > Cassette Heater Unit > Installation Procedure
10) Fit the 2 bosses of the host machine into the holes of the Cassette Heater Unit to install
the Cassette Heater Unit.
• 2 Screws (RS tightening; M4x8)
CAUTION:
The unit may be fallen down if misaligned from the bosses, so be sure to hold the lower
part by hand until the screws are tightened.
Boss
Hole
x2
9-56
Boss
Hole
F-9-120
9-56