Removing The Primary Charging Shutter Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Shutter Unit
3) Disconnect the connector and remove the Drum Heater.
4 Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Shutter Unit
Drum Heater
F-4-210

Removing the Primary Charging Shutter Unit

<Preparation>
1. Open the Front Cover.
2. Open the Inner Cover. (Refer to "Removing the Primary Charging Assembly")
3. Remove the Primary Charging Assembly. (Refer to page 4-97)
<Procedure>
1) Move the Primary Charging Wire Cleaners (Left and Right).
• 2 Screws (to loosen)
Loosen
CAUTION:
Do not remove both Shield Plates (Right and Left) of the Primary Charging Assembly at
the same time. Be sure to work on one Shield Plate at a time. (Otherwise, the frame of
the Primary Charging Assembly can be deformed.)
4-147
F-4-211
4-147