Canon imageRUNNER ADVANCE 6075 Series Service Manual page 483

4
Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
CAUTION:
When installing the Hopper Unit, be sure to follow the order as shown in the figure to
tighten screws.
x4
15) Remove the 4 Tapping Screws.
x4
CAUTION: Points to Note when Installing the Tapping Screws
When tightening the Tapping Screws, turn them in the reverse direction to check the
screw thread on the Hopper Unit side before tightening them. Otherwise, the screw
thread on the Hopper Unit side may be broken, which makes it impossible to tighten the
screw.
4 Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
16) Remove the Bottle Cam.
• 1 E-ring
• 1 Roller
• 1 Bearing
F-4-259
17) Remove the Bottle Box.
• 4 Hooks
F-4-260
E-ring
Roller
Bearing
Bottle Cam
F-4-261
Hooks
Bottle Box
Hook
Hook
F-4-262
4-162
4-162