Installation Procedure - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Installation Procedure

CAUTION:
Refer to "Combination of options" when installing this equipment before operation.
NOTE:
Although model with the Upright Control Panel is used for illustration in this procedure,
the same procedure is applied to model with the Flat Control Panel.
1) Remove packing tapes.
2) Loosen the 2 screws of the Utility Tray Unit, and remove the Utility Tray Mounting Plate.
<In Case of Utility Tray-A1>
9
Installation > Utility Tray-A1/A2 > Installation Procedure
<In Case of Utility Tray-A2>
• Loosen the 2 screws, and move the Utility Tray Mounting Plate in the direction of the arrow
until it stops.
• While pulling the [A] part of the Utility Tray, remove the Utility Tray Mounting Plate.
Screw
F-9-178
9 Installation > Utility Tray-A1/A2 > Installation Procedure
Utility Tray Mounting Plate
CAUTION:
Be sure not to pull the [A] part of the Utility Tray too much.
[A]
9-76
F-9-179
F-9-180
9-76