Canon imageRUNNER ADVANCE 6075 Series Service Manual page 432

4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
3) Pinch the Hook and turn it in the direction of the arrow to remove the Pre-transfer Charging
Assembly Cleaner Holder.
4) Remove the Pre-transfer Charging Wire Cleaner in the direction of the arrow.
CAUTION:
Be careful not to damage the Pre-transfer Charging Wire when removing the Pre-
transfer Charging Wire Cleaner.
4 Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
CAUTION:Points to Caution at Installation
Be sure to push the Charging Wire against the 2 pads of the Pre-transfer Charging Wire
Cleaner to install.
F-4-125
F-4-126
Pad
Charging Wire
Primary
Charging
Wire Cleaner
4-111
F-4-127
4-111