Canon imageRUNNER ADVANCE 6075 Series Service Manual page 778

Alarm
Title
Code
04-0033 Cassette 3 Lifter Movement: The Cassette 3 Lifter Motor (M20) is stopped. Not
Motor overcurrent
alarm Cause: The Cassette 3 is above the upper limit or is stopped
along the way.
Measures:
1. Check the connection between the Cassette 3 Lifter Motor
(M20) and the Feed Driver PCB (PCB3).
Motor side: J2072, PCB side: J225
2. Replace the Cassette 3 Lifter Motor (M20).
3. Check the Cassette 3 Upper Limit Sensor (PS68).
4. Check the Cassette 3 Lifter Gear (damage, foreign matter,
etc.).
5. Replace the Feed Driver PCB (PCB3).
04-0034 Cassette 4 Lifter Movement: The Cassette 4 Lifter Motor (M21) is stopped. Not
Motor overcurrent
alarm Cause: The Cassette 4 is above the upper limit or is stopped
along the way.
Measures:
1. Check the connection between the Cassette 4 Lifter Motor
(M21) and the Feed Driver PCB (PCB3).
Motor side: J2072, PCB side: J225
2. Replace the Cassette 4 Lifter Motor (M21).
3. Check the Cassette 4 Upper Limit Sensor (PS71).
4. Check the Cassette 4 Lifter Gear (damage, foreign matter,
etc.).
5. Replace the Feed Driver PCB (PCB3).
04-0069 Error in Right Deck Movement: Jam occurred when picking up from the Right
Pickup Solenoid
connection Cause: Connection of the Right Deck Pickup Solenoid (SL6)
cannot be detected.
Measures:
1. Check the connection of the Right Deck Pickup Solenoid
(SL6).
Solenoid side: J2070, Pickup Unit side: J3633, Feed Driver
PCB side: J222
2. Replace the Right Deck Pickup Solenoid (SL6).
3. Replace the Feed Driver PCB (PCB3).
04-0070 Error in Left Deck Movement: Jam occurred when picking up from the Left Deck.
Pickup Solenoid Cause: Connection of the Left Deck Pickup Solenoid (SL7)
connection cannot be detected.
Measures:
1. Check the connection of the Left Deck Pickup Solenoid (SL7).
Solenoid side: J2052, Pickup Unit side: J3634, Feed Driver
PCB side: J221
2. Replace the Left Deck Pickup Solenoid (SL7).
3. Replace the Feed Driver PCB (PCB3).
7
Error Code > Alarm Code > List of Alarm Code
A. movement /B. cause /C. measures
using the Cassette 3.
using the Cassette 4.
Deck.
7 Error Code > Alarm Code > List of Alarm Code
Alarm
Title
Code
04-0071 Error in Cassette Movement: Jam occurred when picking up from the Cassette 3.
3 Pickup Solenoid Cause: Connection of the Cassette 3 Pickup Solenoid (SL3)
connection cannot be detected.
Measures:
1. Check the connection of the Cassette 3 Pickup Solenoid
(SL3).
Solenoid side: J2073, Pickup Unit side: J3635, Feed Driver
PCB side: J223
2. Replace the Cassette 3 Pickup Solenoid (SL3).
3. Replace the Feed Driver PCB (PCB3).
04-0072 Error in Cassette Movement: Jam occurred when picking up from the Cassette 4.
4 Pickup Solenoid Cause: Connection of the Cassette 4 Pickup Solenoid (SL4)
connection cannot be detected.
Measures:
1. Check the connection of the Cassette 4 Pickup Solenoid
(SL4).
Solenoid side: J2075, Pickup Unit side: J3636, Feed Driver
PCB side: J224
2. Replace the Cassette 4 Pickup Solenoid (SL4).
3. Replace the Feed Driver PCB (PCB3).
04-0073 Error in Multi-purpose Movement: Jam occurred when picking up from the Multi-
Pickup Solenoid
connection Cause: Connection of the Multi-purpose Pickup Solenoid (SL2)
cannot be detected.
Measures:
1. Check the connection of the Multi-purpose Pickup Solenoid
(SL2).
Solenoid side: J2001, Relay: J3060, J3121, J3235, Main
Driver PCB side: J106
2. Replace the Multi-purpose Pickup Solenoid (SL2).
3. Replace the Main Driver PCB (PCB2).
04-0074 Error in Left Deck Movement: Jam occurred when picking up from the Left Deck.
Merging Solenoid Cause: Connection of the Left Deck Merging Solenoid (SL11)
connection cannot be detected.
Measures:
1. Check the connection of the Left Deck Merging Solenoid
(SL11).
Solenoid side: J2106, Relay side: J3270, Duplex Driver PCB
side: J343
2. Replace the Left Deck Merging Solenoid (SL11).
3. Replace the Duplex Driver PCB (PCB4).
A. movement /B. cause /C. measures
purpose Tray.
7-93
7-93