Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1156

1) Open the Controller Box, and free the Signal Cable and the Power Supply Cable of the
host machine from the 4 Wire Saddles and the Edge Saddle at the back of the HDD Case
Unit.
x5
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
2) Pull out the cables to the front, and connect the Signal Cable and the Power Supply Cable
to the Mirroring Board or Encryption Board.
3) Install the Mirroring Board or Encryption Board.
• 4 Screws (TP; M3x6)
F-9-348
9 Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
x2
x4
9-159
F-9-349
F-9-350
9-159