Canon imageRUNNER ADVANCE 6075 Series Service Manual page 660

• [E-mail]:
E-mails concerning update statuses are sent from the device to the contact registered here.
Enter the E-mail address of the service technician in charge.
Enter 1-byte alphanumeric or symbols up to 64 characters.
• [Comments]:
Enter the comment in 1-byte alphanumeric or symbols up to 128 characters.
Enter the comment to be automatically included in E-mail. Model Name in the comment will
be helpful to identify the device relevant to the E-mail.
NOTE:
[Timing to Apply]
• For firmware versions with no remote update permission, [Auto] cannot be selected in
[Timing to Apply]
[Updated Module Only]
• For firmware versions with difference-only delivery disabled, only [OFF] can be
selected in [Updated Module Only].
[E-mail]
• To send E-mails to multiple destinations, each E-mail address should be delimited with
comma (,) or semi-colon (;).
• For E-mail addresses entered in this field, a notification E-mail is sent at the following
timing.
-Distribution Set
-Distribution Started
-Distribution Finished
-Update Started
-Update Finished
-Error Occurred
6
Troubleshooting > Making Initial Checks > c. Manual Download and Update (On-site Update from Service Mode)
6 Troubleshooting > Making Initial Checks > c. Manual Download and Update (On-site Update from Service Mode)
8. Confirm Export Criteria screen is shown as below. Check the contents and press [Accept]
button.
9. One of the screens below is shown according to the setting.
• When Distribution Time and Timing to Apply of Distribution Setting are set to [Now] and
[Auto], respectively:
Firmware is downloaded and updated automatically to the device. The device is
automatically restarted upon update completed. Now STEP 1 is successfully completed.
6-84
F-6-164
F-6-165
6-84