4
Parts Replacement and Clearning > External Auxiliary System > Removing the Flat Control Panel
11)
Move the Flat Control Panel to the front and disconnect the Control Panel Cable and
Power Supply Cable.
• 1 Edge Saddle
• 1 Wire Saddle
Control Panel Cable Wire Saddle
x2
Power Supply Cable
4
Parts Replacement and Clearning > External Auxiliary System > Removing the Flat Control Panel
Edge Saddle
F-4-513
12)
Lift up the Flat Control Panel in the direction of the arrow and pull out the Control
Panel Cable.
13)
Disconnect the Control Panel Connector and Power Supply Connector, and then
remove the Flat Control Panel from the machine.
Control Panel Cable
14)
Secure the Power Supply Cable removed in step 11 with the Wire Saddle again.
4-242
Control Panel Connector
x2
Power Supply Connector
F-4-514
4-242