Version Upgrade Via Sst; Overview - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Version Upgrade via SST

■ Overview

The system software can be downloaded either of the two modes below via SST.
• Assist mode(recommended)
• Single mode
Assist mode provides the following features.
• Attached option types are automatically recognized.
• The new versions of the system software for attached option types are automatically
searched.
• The set of system software with interactive behavior confirmed is automatically
downloaded.
• The accessories attached to the host machine are automatically recognized to download
the system software for each accessory.
This machine holds a number of system software components that mutually interacts
during operation. Behaviors of such system software should be confirmed when these are
downloaded as the set. Thus, Assist mode is basically recommended to download the system
software for this machine.
Use Single mode only when any of the following conditions is met.
• When downloading some the system software components, i.e. DCON, RCON or options.
• When reloading the system software after HDD is formatted
NOTE:
Use Single mode only when any of the following conditions is met.
• When downloading some the system software components, i.e. DCON, RCON or options.
• When reloading the system software after HDD is formatted
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Overview
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Overview
● Downloading the System Software
System software is saved in the temporary storage area on HDD after downloaded with SST.
Restart the machine after download so that it will be written to the system area, and the flash
ROM.
After the writing has been completed normally, this machine automatically restarts with the
new system software.
1)
System
Software
HDD
3) Writing takes place.
System
Software
<<<<< download shell >>>>>
[ SYSTEM JPja-m ] - - - - Upgrading complete
[ SYSTEM ZZ ] - - - - - - - Upgrading complete
Temporary
[ SYSTEM JPja-w ] - - - -
Upgrading complete
[ SYSTEM ZZ ] - - - - - - -
Upgrading complete
[ FONT F ] - - - - - - - - - - Upgrading complete storage area
[ FONT G ] - - - - - - - - - - Upgrading complete
+++ Switch OFF the power then ON. +++
System area
BOOT area
FLASH
ROM
The system software is downloaded.
- - - Download Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - - Complete
[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - - Complete
[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - -
Complete
[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - -
Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - - Complete
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - Complete
[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - - Complete
HDD
System
Software
Temporary
storage area
2) The main power switch is turned off and then on.
4) The main power switch is turned off and then on.
5) The machine starts up using the new version.
6-42
F-6-73
6-42