Installation Procedure For Expansion Bus-F1/F2, Ipsec Board-B2; Points To Note At Installation - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1

Points to Note at Installation

CAUTION:
To install the IPSec Board-B2 and the Wireless LAN Board-B1, the Expansion Bus-F1/F2 is required.
Procedures after "Removing the Main Controller PCB 1" will falls into 3 Types according to the installation combination.
Reference Pages in the Manual According to Product Combination:
Title Reference for procedure
Refer to "Installing the Expansion Bus-F1/F2 and the IPSec Board-B2
Type-1
Simultaneously".
Refer to "Installing the Expansion Bus-F1/F2, the Wireless LAN
Type-2
Board-B1 and the IPSec Board-B2 Simultaneously".
Refer to "Installing the Expansion Bus-F1/F2, the Wireless LAN
Type-3
Board-B1 and the IPSec Board-B2 Simultaneously"
9
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Points to Note at Installation
Expansion Bus-F1/F2
X
X
X
9 Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Points to Note at Installation
IPSec Board-B2 Wireless LAN Board-B1
X
X
X X
9-94
Reference Pages in the Manual
p. 9-99
p. 9-100
p. 9-100
T-9-7
9-94