18) Install the Card Reader.
<In the Case of Upright Control Panel>
18-1) Install the Card Reader to the Card Reader Mounting Plate.
• 1 Toothed Washer
• 1 Screw (RS Tightening; M4x8)
18-2) Install the Card Reader Unit assembled in step 18-1).
• 1 Screw (TP; M4x12)
9
Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
F-9-199
F-9-200
9
Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
<In the Case of Flat Control Panel>
18-1) Install the Card Reader.
• 1 Toothed Washer
• 1 Screw (Binding; M4x20)
19) Put the connector of the Card Reader Unit through the hole on the Card Reader
Mounting Plate.(Upright Control Panel only)
20) Connect the connectors of the Card Reader Unit and the Card Reader External Relay
Harness.
9-84
F-9-201
F-9-202
9-84