Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1242

7) Affix the HDD No.1 of the R-HDD Label to the handle of the Removable HDD.
8) Write down the serial number of the host machine to the label for recording the number,
and affix it to the area indicated in the figure.
■ Assembling the Option HDD (the Second HDD)
CAUTION: Points to Caution at Installation
Be sure to install the HDD Connector to the side with screw holes of the HDD
Connector Plate.
Label
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
HDD No.
Serial No.
XXXXXXXX
F-9-492
Screw Hole
Connector
Screw Hole
F-9-493
9 Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
NOTE:
Use the parts included in the package of the Option HDD and the Removable HDD Kit.
1) Assemble the Option HDD (250GB).
• 1 HDD Support Plate
• 4 Anti-vibration Dampers
• 4 Spacers
• 1 HDD Connector Plate (Included in the Removable HDD Kit)
• 1 Option HDD
• 4 Screws (W Sems; M3x14)
x4
9-245
Option HDD
Connector
HDD Connector Plate
(Included in Removable
HDD Kit)
HDD Support Plate
Spacer
Anti-vibration
Damper
F-9-494
9-245