Removing The Pressure Roller Static Eliminator Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Fixing > Removing the Pressure Roller Static Eliminator Unit
2) Remove the Pressure Roller Unit.
4 Parts Replacement and Clearning > Fixing > Removing the Pressure Roller Static Eliminator Unit

Removing the Pressure Roller Static Eliminator Unit

<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Refer to page 4-176)
3. Remove the Fixing Front Cover. (Refer to "Removing the Fixing Cleaning Web")
4. Remove the Fixing Drive Unit 1. (Refer to "Separating the Fixing Upper Unit from the Fixing
Lower Unit")
5. Secure the Shutter Drive Gear. (Refer to "Separating the Fixing Upper Unit from the Fixing
Lower Unit")
6. Separate the Fixing Upper Unit from the Fixing Lower Unit. (Refer to page 4-182)
7. Remove the Pressure Roller Unit. (Refer to page 4-188)
<Procedure>
F-4-343
1) Remove the Pressure Roller Static Eliminator Unit.
• 2 Screws
x2
4-189
F-4-344
4-189