Cleaning The Dust Collecting Glass - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Laser Exposure System > Cleaning the Dust Collecting Glass
7) Remove the Laser Scanner Unit.
CAUTION:
Before removing the Laser Scanner Unit, check that the hooking wire of the unit is not
hooked to the frame of the main body.
CAUTION:
When installing the Laser Scanner Unit, be sure to check that the bosses are fitted into
the holes.
4 Parts Replacement and Clearning > Laser Exposure System > Cleaning the Dust Collecting Glass

Cleaning the Dust Collecting Glass

<Preparation>
1) Open the Front Cover.
2) Remove the Primary Charging Assembly. (Refer to page 4-97)
<Procedure>
Removing the Dustproof Glass
1) Pull out the Dustproof Glass and clean it with lint-free paper.
F-4-85
F-4-86
4-96
F-4-87
4-96