Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1193

6) Click [Download] under "Download/delete Disabled License File" item. Following the
instructions on the window, specify the location to save the file. Set a distinctive name
for the disabled license file so that you can recognize it for which application. After you
download the disabled license file to your PC, click [Delete]. Click [Yes] in a confirmation
window for license deletion.
7) Return to the MEAP Application Management page, click [Uninstall] button of the
application you want to uninstall. Click [Yes] in a confirmation window for uninstallation. If
there are several applications, repeat the procedures 1) to 7).
8) After the use of this product is started, re-install the application using an application file (jar
file) of each application from SMS and the disabled license file (lic file).
8. User Authentication Information Registered by SSO-H (Single Sign-ON H)
In the case that the MEAP login application has been changed to SSO-H, there is a need to
make a backup of the user authentication information.
1) Access the URL given below.
http://[IP address of the device]:8000/sso/
The default password is MeapSmsLogin. If a user has changed the password, ask the user
to change the password again after the use of this product is started.
CAUTION:
The default password is MeapSmsLogin. If the user has changed the password, ask
him/her to change the password again after the use of this product is started.
2) Login with the user name and password registered as an administrator in SSO-H.
The default administrator user name and password are as follows:
User Name: Administrator
Password: password
3) Click [User Control].
4) Put a checkmark to Select All, and then click [Export].
5) Leave the file format and character code as defaults and click [Start Export].
6) Following the instructions on the window, specify the location to save the file and click [Save].
9. Backup of User inbox and Advanced Box document data
CAUTION: Backup of "Advanced Box"
When setting a SMB server as a backup destination, Advanced Box data saved in a
large capacity HDD cannot be backed up. The Advanced Box data backed up from the
large capacity HDD cannot be restored to the standard HDD. Depending on the system
version of the machine, both backup and restoration might not be performed.
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Making a Backup of the Data (Reference only)
The procedure of backup and restoration of a box document data is described below.
Specify the backup destination of a document data:
• Backup to SMB server
Select SMB as a backup destination and specify an address, a user name, a password,
and a path to the SMB server to which saved data is backed up.
• Backup to USB HDD
Select USB HDD as a backup destination and specify a path to the USB HDD folder to
which saved data is backed up.
CAUTION: Data which cannot be backed up
If you back up/restore stored data without restarting the machine after changing the
language displayed on the touch panel display by pressing [Settings/Registration] >
[Preferences] from the control panel of the machine, the stored data may not be backed
up/restored properly. For more information on the data that cannot be backed up, see
Points to Note for Installation.
CAUTION:
If the language setting in the common specification settings (Settings/Registration) is
set to ON, 'host address' and 'path to folder' might not be displayed correctly or cannot
be referred.
CAUTION:
• Regarding the method of inputting characters, see 'Basic Operations' in the
• A host address can be up to 128 characters in 1 byte or 64 characters in 2 bytes
• A path to the folder can be up to 255 characters in 1 byte (127 characters in 2 bytes).
• A user name can be up to 128 characters in 1 byte or 64 characters in 2 bytes
• A password can be up to 7 to 48 characters using the 'alphanumeric character' and
• The voice sound symbol and the semi-voice sound symbol entered in the 'Katakana (1
9 Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Making a Backup of the Data (Reference only)
e-Manual.
using the 'Kana-Kanji,' 'Katakana,' 'alphanumeric character,' 'mark,' and 'code input'
modes.
using the 'Kana-Kanji,', 'Katakana,' 'alphanumeric character,' 'mark,' and 'code input'
modes.
'mark (1 byte)' modes.
byte)' mode are counted up as one 1-byte character.
9-196
9-196