Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1070

27) Secure the AC cord to the cord mount.
• 1 screw with flat spring
28) Reatach the exterior covers of the host machine in the following sequence;
[1] Rear Lower Cover
• 3 screws (RS-tight; M4x10)
[2] Close the Controller Box.
• 4 screws (RS-tight; M4x10)
[3] Connect the Reader Communication Cable.
• 1 claw
• 1 protrusion
[4] Fix the Harness
• 2 wire saddles
29) Close the deck compartment.
Manually slide the paper deck to the left place in aside of the host machine.
9
Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-D1)
30) Stick the power supply label on the rear panel of the paper deck.
x1
F-9-172
31) Fix the paper deck cable in the wire saddle and joint the connector to the host machine.
9 Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-D1)
9-73
F-9-173
x1
x1
F-9-174
9-73