Network - Canon imageRUNNER ADVANCE 6075 Series Service Manual

COPIER > OPTION > FEED-SW
DK5-TURN ON/OFF of OP-Deck Pckup Rol little rotn
Lv.1 Details To set whether to rotate the Option Deck Pickup Roller a little after
completion of job or at the time of warm-up rotation.
If the Pickup Deck has not been used for a long time, a part of the
Separation Roller engaged with the Pickup Roller becomes worn and
the roller stops rotation. As a result of that, jam may occur. When 1
is set, the Pickup Roller rotates 75mm after completion of job so that
wear of the Separation Roller can be reduced.
As the usage is extended or at the operation performed first time for
the day in a low temperature environment, the Separation Roller is
not rotated in response to rotation of the Pickup Roller. As a result of
that, jam may occur. When 2 is set, the Pickup Roller rotates 75mm
at warm-up rotation.
Use case When pickup jam occurs with the following conditions
- Pickup Deck has not been used for a long time
- The usage is extended
- At the operation performed first time for the day in a low
temperature environment
Caution When ON is set, papers sticking out of the Receptacle may get stuck
at the time of opening and closing the deck.
Display/adj/set range 0 to 3
0: OFF, 1: ON after a job, 2: ON at warm-up rotation, 3: ON after a
job and at warm-up rotation
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK3-
TURN, DK4-TURN
TFL-RTC Set delvry dest at rcvry after tray full
Lv.1 Details To select the delivery destination for a job with multiple pages after
recovering the Delivery Tray that reaches the full level.
When 0 (default) is set, a job is output from the delivery destination
again from which the last job was delivered.
When 1 is set, a job is output from the delivery destination which
priority is set as high at "Output Tray Settings" in user mode.
Use case When changing the delivery tray
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Output from the tray from which the last job was output.
1: Output from the delivery destination which priority is high among
the delivery trays.
Default value 0
Related user mode Function Settings> Common> Paper Output Settings> Output Tray
Settings
8
Service Mode > COPIER > OPTION > NETWORK
T-8-63
8 Service Mode > COPIER > OPTION > NETWORK

■ NETWORK

COPIER > OPTION > NETWORK
RAW-DATA Setting of received data print mode
Lv.2 Details To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data
or image processing in the case of trouble with received image.
Use case When received image trouble occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to set the value back to "0: Normal print operation" after
recovering from the trouble.
Display/adj/set range 0 to 1
0: Normal print operation, 1: Print with original data without image
processing
Default value 0
RMT-LANG Language setting of remote UI
Lv.2 Details To set the language on remote UI.
Use case Upon user's request
Adj/set/operate method 1) Switch with +/- key, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range ja/en/de/fr/it/es
ja: Japanese, en: English, de: German, fr: French, it: Italian, es:
Spanish
IFAX-LIM No. of max print lines at IFAX reception
Lv.2 Details To set the maximum number of lines for e-mail text to be printed
when receiving IFAX.
Setting of this item can prevent endless printing of the attached file
data in the case of receiving an error e-mail or failure in interpretation
of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail
text without attached file.
Use case When preventing endless print in the case of failure in reception
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: E-mail text not printed, 999: Unlimited
Default value 500
SMTPTXPN Setting of SMTP TX port number
Lv.2 Details To set SMTP transmission port number.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
Default value 25
8-143
8-143