Points To Note At Installation Work - Canon imageRUNNER ADVANCE 6075 Series Service Manual

• The optional Copy Tray, Duplex Color Image Reader Unit are attached.
1,533 mm
500 mm
or more
NOTE: Securing Space for Servicing
The space required behind the machine differs according to whether any of the following
options is installed or not.
Be sure to make necessary space in accordance with the conditions.
• Document Insertion Unit-L1
• Document Insertion / Folding Unit-H1
<Space required behind the machine>
• When any of the foregoing options is installed: 800mm or more
• When any of the foregoing options is not installed: 100mm or more
3) To install the host machine, install it in a well-ventilated place. Especially when there are
multiple host machine s, be sure to locate the machine where the machine is free from
direct exhaust of other machines. Be sure to keep the machine away from the air-inlet duct
which is used for ventilation of the room.
9
Installation > Checking before Installation > Points to Note at Installation Work
100 mm or more
500 mm 500 mm
or more or more
F-9-2
9 Installation > Checking before Installation > Points to Note at Installation Work

Points to Note at Installation Work

Take note of the following points when installing the host machine.
1) Moving the host machine from a cool place to a warm place can generate condensation,
causing moisture beads on the metal surface. Using the host machine while the machine
is condensed can cause image failure. Therefore, when moving the machine from a cool
place to a warm place to install, unpack the host machine and leave it for 2 hours or more
before the installation work so that the machine becomes used to the room temperature.
2) Be sure to work with a group of 4 or more people to install the host machine.
9-3
9-3