Dsply-Sw - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ DSPLY-SW

COPIER > OPTION > DSPLY-SW
UI-COPY Display/hide of copy screen
Lv.2 Details To set whether to display or hide the copy function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-BOX Display/hide of Inbox screen
Lv.2 Details To set whether to display or hide the Inbox function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: No Inbox function (Storing is not available even with PDL to
Inbox.)
1: Inbox function is active
2: Inbox function is active (with limitation; Storing is available with
PDL to Inbox despite no display on the Control Panel/remote UI)
Default value 1
Related user mode Preferences> Display Settings> Store Location Display Settings>
Mail Box
The setting value is changed to 2 when turning OFF the foregoing
user mode, and the value is changed to 1 when turning ON the mode
at power-off/on.
As the setting value of this service mode is changed, the setting
value of the foregoing user mode is also changed.
UI-SEND Display/hide of send screen
Lv.2 Details To set whether to display or hide the SEND function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-FAX Display/hide of FAX screen
Lv.2 Details To set whether to display or hide the FAX function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
T-LW-LVL [Not used]
Lv.2 Details -
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER > OPTION > DSPLY-SW
MEAP-DSP Screen switch set from MEAP to standard
Lv.2 Details To set to enable/disable switching from MEAP screen to the standard
screen (COPY/SEND/Mail Box screen, etc). (Setting to display/hide
the arrow mark on MEAP screen)
In the case of an error/jam/alarm, the screen is switched to the
standard screen to display warning even if disabling this mode.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
Related service mode COPIER> OPTION> DSPLY-SW> ANIM-SW
Supplement/memo If disabling the switch with ANIM-SW, the screen will not be switched
to the standard screen even in the case of an error/jam/alarm.
ANIM-SW Screen switch set from MEAP to warning
Lv.2 Details To set to enable/disable switching from MEAP screen to the error/
jam screen.
If disabling this mode, the screen will not be switched to the warning
screen in the case of an error/jam/alarm, and a message is appeared
on the MEAP screen indicating to contact the service person.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled (No display of warning screen)
Default value 0
Related service mode COPIER> OPTION> DSPLY-SW> MEAP-DSP
Supplement/memo If just disabling the switch with MEAP-DSP, the screen is switched to
the standard screen in the case of an error/jam/alarm. If disabling the
switch with ANIM-SW, the screen will not be switched to the standard
screen and a warning is appeared on MEAP screen.
UI-PRINT Display/hide of print job screen
Lv.2 Details To set whether to display or hide the print job screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
8-125
8-125