Enabling [Manual Update] Button Of User Mode (Remote Ui) - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Updater > Enabling [Manual Update] Button of User Mode (Remote UI)
Enabling [Manual Update] Button of User Mode
(Remote UI)
To allow users to install firmware from Updater using the file on Local PCs, the setting of
firmware installation should be set to ON for users in advance.
Service Setting of Device Service Mode
Technician (Level 1)
• Remote UI screen of Updater when the setting is not enabled (LOCLFIRM (0)):
• Remote UI screen of Updater when the setting is enabled (LOCLFIRM (1)):
• Periodical validation
Service Setting of Device Service Mode
Technician (Level 1)
2 Technology > Updater > Enabling [Manual Update] Button of User Mode (Remote UI)
COPIER >OPTION >FNC-SW >LOCLFIRM
(0 -> 1)
F-2-372
F-2-373
COPIER >OPTION >FNC-SW >CDS-LVUP
(0 -> 1)
2-251
2-251