Canon imageRUNNER ADVANCE 6075 Series Service Manual page 870

COPIER > ADJUST > HV-TR
P-TR-OF6 Adj pre-trn charge crrnt ofst: Special 2
Lv.2 Details To adjust the offset value of the pre-transfer charging current for
special paper 2.
Set the environment (temperature and humidity), feed mode, and
pre-transfer charging current offset value in the order from left.
When the actual usage status matches to the environment and feed
speed set in this item and the paper type (special paper 2) set in
P-TR-SP2, the specified offset value is added to the pre-transfer
charging target current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range Environment: 0 to 4
0: No specification, 1: Environment 1and 2, 2: Environment 3 to 5, 3:
Environment 6 and 7, 4: All environments
Feed mode: 0 to 7
0: No specification, 1: Cassette/3.5K deck 1-sided, 2: Cassette/3.5K
deck 2-sided, 3: Multi-purpose Tray 1-sided, 4: Multi-purpose Tray
2-sided, 5: Large deck 1-sided (only POD Deck Lite), 6: Large deck
2-sided (only POD Deck Lite), 7: All modes
Pre-transfer charging current offset value: -10 to 10
Unit 10 micro A
Default value 0
Related service mode COPIER> ADJUST> HV-TR> P-TR-OF1 to 5, P-TR-SP2
TR-SP1 Set trns tgt crrnt adj: special paper 1
Lv.2 Details To set the paper type of special paper 1 which the offset value of the
target current of the Transfer Roller is adjusted.
When the actual usage status matches to the paper type set in this
item and the environment and feed mode set in TR-OFS5, the offset
value is added to the Transfer Roller target current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 10
0: No specification, 1: Transparency, 2: Postcard, 3: Tracing paper,
4: Bond paper, 5: Labels, 6: Recycled paper, 7: Color paper, 8:
Punched paper, 9: Tab paper, 10: Letterhead
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-OFS5
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-SP2 Set trns tgt crrnt adj: special paper 2
Lv.2 Details To set the paper type of special paper 2 which the offset value of the
target current of the Transfer Roller is adjusted.
When the actual usage status matches to the paper type set in this
item and the environment and feed mode set in TR-OFS6, the offset
value is added to the Transfer Roller target current.
Use case When transfer failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 10
0: No specification, 1: Transparency, 2: Postcard, 3: Tracing paper,
4: Bond paper, 5: Labels, 6: Recycled paper, 7: Color paper, 8:
Punched paper, 9: Tab paper, 10: Letterhead
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-OFS6
TR-L-SP1 Set lead edge trns tgt crrnt adj: Spcl 1
Lv.2 Details To set the paper type of special paper 1 which the offset value of the
target current of the Transfer Roller is adjusted.
When the paper type is the specified one , the offset value set in TR-
L-OF5 is added to the leading edge transfer target current and the
leading edge transfer bias output timing.
Use case When a drum separation failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 10
0: No specification, 1: Transparency, 2: Postcard, 3: Tracing paper,
4: Bond paper, 5: Labels, 6: Recycled paper, 7: Color paper, 8:
Punched paper, 9: Tab paper, 10: Letterhead
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-L-OF5
TR-L-SP2 Set lead edge trns tgt crrnt adj: Spcl 2
Lv.2 Details To set the paper type of special paper 2 which the offset value of the
target current of the Transfer Roller is adjusted.
When the paper type is the specified one , the offset value set in TR-
L-OF6 is added to the leading edge transfer target current and the
leading edge transfer bias output timing.
Use case When a drum separation failure occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 10
0: No specification, 1: Transparency, 2: Postcard, 3: Tracing paper,
4: Bond paper, 5: Labels, 6: Recycled paper, 7: Color paper, 8:
Punched paper, 9: Tab paper, 10: Letterhead
Default value 0
Related service mode COPIER> ADJUST> HV-TR> TR-L-OF6
8-88
8-88