Check Items When Turning Off The Main Power; Installation Procedure - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.

Installation Procedure

■ Removing the HDD and HDD Case Unit
1) Push [A] part, and open the Right Rear Cover 1.
[A]
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
2) Remove the Side Cover.
• 1 Screw
• 2 hooks
3) Free the Reader Communication Cable and the Reader Power Supply Cable from the 2
Wire Saddles.
4) Remove the Left Rear Cover.
• 2 Protrusions
F-9-475
9 Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
Hook
Hook
F-9-476
x2
Protrusion
F-9-477
9-239
9-239