Ccd - Canon imageRUNNER ADVANCE 6075 Series Service Manual

COPIER > FUNCTION > INSTALL
BRWS-ACT ON/OFF of service browser
Lv.1 Details To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power
switch is turned OFF/ON after execution.
If connection with the UGW server is successful, "OK!" is displayed.
If "NG!" is displayed, execute a communication test using COM-
TEST.
The setting is enabled after reboot. Whether the service browser is
ON or OFF can be checked in COPIER> DISPLAY> USER> BRWS-
STS (1: ON, 2: OFF).
Use case • When using the service browser
• At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After execution, turn OFF/ON the main power switch. After reboot,
be sure to check the usage status in COPIER> DISPLAY> USER>
BRWS-STS.
Display/adj/set range At normal termination: OK!, At abnormal termination: NG!
Related service mode COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
CDS-CTL Set country/area when using CDS
Lv.1 Details To set country/area to enable CDS.
Use case When enabling CDS
Display/adj/set range Country/area set in COPIER> OPTION> FNC-SW> CONFIG, CA
(Canada), LA (Latin America) and HK (Hong Kong)
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> CONFIG
Supplement/memo CDS: Contents Delivery System
DRM-INIT Initialization of Photosensitive Drum
Lv.1 Details To initialize Photosensitive Drum.
Clear drum counter (PT-DRM), Drum Lot number, and checksum
stored in the DC Controller.
Use case After replacement of the Photosensitive Drum
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, At normal termination: OK, At abnormal
termination: NG
Related service mode COPIER > COUNTER > DRBL-1 > PT-DRM
8
Service Mode > COPIER > FUNCTION > CCD
T-8-40
8 Service Mode > COPIER > FUNCTION > CCD

■ CCD

COPIER > FUNCTION > CCD
DF-WLVL1 White level adj in book mode: color
Lv.1 Details To adjust the white level for copyboard scanning automatically by
setting the paper which is usually used by the user on the Copyboard
Glass.
Use case - When replacing the Copyboard Glass
- When replacing the Scanner Unit
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Set paper on the Copyboard Glass.
2) Select the item, and then press OK key.
Caution Be sure to execute DF-WLVL2 in a row.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> CCD> DF-WLVL2
COPIER> ADJUST> CCD> DFTBK-R, DFTBK-G, DFTBK-B
DF-WLVL2 White level adj in DADF mode: color
Lv.1 Details To adjust the white level for DADF scanning automatically by setting
the paper which is usually used by the user on the DADF.
Use case - When replacing the Copyboard Glass
- When replacing the Scanner Unit
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Set paper on the DADF.
2) Select the item, and then press OK key.
Caution Be sure to execute this item after DF-WLVL1.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> CCD> DF-WLVL1
COPIER> ADJUST> CCD> DFTAR-R, DFTAR-G, DFTAR-B,
DFTAR2-R, DFTAR2-G, DFTAR2-B, DFTAR-BW, DFTAR2BW,
DFTBK-R, DFTBK-G, DFTBK-B
DF-LNR Deriving of DADF front/back linearity
Lv.1 Details To derive the front/back side linearity characteristics in the use of
DADF based on the scanning data of the DADF complex chart (No. 2,
No. 10).
Use case When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the value of the reader's service label. (under COPIER>
ADJUST> CCD)
DFCH-R2, DFCH-G2, DFCH-B2, DFCH-K2,
DFCH-R10, DFCH-G10, DFCH-B10, DFCH-K10,
DFCH2R2, DFCH2G2, DFCH2B2, DFCH2K2,
DFCH2R10, DFCH2G10, DFCH2B10, DFCH2K10
2) Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> ADJUST> CCD> DFCH-R2, DFCH-G2, DFCH-B2,
DFCH-K2, DFCH-R10, DFCH-G10, DFCH-B10, DFCH-K10,
DFCH2R2, DFCH2G2, DFCH2B2, DFCH2K2, DFCH2R10,
DFCH2G10, DFCH2B10, DFCH2K10
8-100
8-100