Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1008

CAUTION:
Before installing the Developing Assembly, be sure to check that the Buffer Shutter is
not opened.
If forcedly inserting the Developing Assembly while the Buffer Shutter is open, the
Buffer Shutter may get damage. When the Buffer Shutter is open, be sure to close it by
pulling it toward the front.
Whether the Developing Assembly is installed properly can be checked with the Shutter
Arm.
<Buffer Shutter is closed>
Shutter Arm
9
Installation > Installation > Installing the Developing Assembly
F-9-13
<Buffer Shutter is open>
Shutter Arm
F-9-14
9 Installation > Installation > Installing the Developing Assembly
CAUTION: How to Hold the Developing Assembly
• When holding the Developing Assembly, be sure to hold the handle of the
Developing Assembly as shown in the figure.
• Do not touch the shutter area of the Developing Assembly. The shutter area is
slippery, so it may cause a fall of the assembly.
9-11
F-9-15
9-11