Installing the Fixing Assembly
1) Remove the tapes securing the tag.
2) Turn the Fixing Feed Unit Release Lever in the direction of the arrow and pull the Fixing
Feed Unit all the way out.
9
Installation > Installation > Installing the Fixing Assembly
NOTE:
In the case that the Fixing Nip Pressure Release Screw is hard to be removed, release
the lock by pressing the Lock Springs at both rails, and pull out the Fixing Feed Unit
further until it stops.
F-9-21
9
Installation > Installation > Installing the Fixing Assembly
Lock Spring
9-14
Lock Spring
F-9-22
9-14