Canon imageRUNNER ADVANCE 6075 Series Service Manual page 877

COPIER > ADJUST > MISC
ACS-CNT Set jdgmt pixel count area in ACS:front
Lv.2 Details To set the area which counts the pixel to judge the color presence in
ACS mode.
As the greater value is set, the judgment area is widened.
Use case When adjusting the area which counts the pixel to judge the color
presence in ACS mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 0
ACS-EN2 Set ACS mode jdgmt area in DADF mode
Lv.2 Details To set the judgment area in ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
Use case When adjusting the judgment area in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 1
ACS-CNT2 Set ACS jdgmt pixel count area in DADF
Lv.2 Details To set the area which counts the pixel to judge the color presence in
ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
Use case When adjusting the area which counts the pixel to judge the color
presence in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 0
8
Service Mode > COPIER > ADJUST > MISC
8 Service Mode > COPIER > ADJUST > MISC
COPIER > ADJUST > MISC
WT-FL-LM Set of waste toner full dis timing
Lv.1 Details If the user sets the darker/lighter copy density than the normal
density, the toner level to be consumed is increased/decreased. As
a result, the number of images to be printed until the Waste Toner
Container becomes full varies.
According to the usage of the user, set the number of images
(calculation with A4 and 5% image duty) until the full toner message
is displayed.
Set -2 if the setting is dark, but set -1 according to circumstances.
Set 2 if the setting is light, but set 1 according to circumstances.
Use case When adjusting the full toner display timing according to the usage of
the user
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: 400,000 (A4, 5% image duty), -1: 450,000, 0: 500,000,
1: 550,000, 2: 600,000
Default value 0
SEG-ADJ3 Set text/photo jdgmt stdrd: back side
Lv.1 Details To set the judgment level of text/photo original in Text/Photo/Map
mode (back side at duplex reading with 1 path).
As the value is increased, the original tends to be detected as a
photo document, and as the value is decreased, the original tends to
be detected as a text document.
Use case When adjusting the classification level of text and photo in Text/
Photo/Map mode (back side at duplex reading with 1 path)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -4 to 4
Default value 0
K-ADJ3 Set Bk text jdgmt stdrd: back side
Lv.1 Details To set the judgment level of black characters at text processing (back
side at duplex reading with 1 path).
As the value is increased, the text tends to be detected as black.
Use case When preferring the text to be judged as black (back side at duplex
reading with 1 path)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -3 to 3
Default value 0
8-95
8-95