Canon imageRUNNER ADVANCE 6075 Series Service Manual page 932

COPIER > OPTION > NETWORK
IKEINTVL Setting of IKE retry interval
Lv.1 Details To set retry interval in the case of no response from the
communication target at the time of IKE packet transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 10
Unit second
Default value 5
Supplement/memo IKE: Internet Key Exchange
IPSDEBLV Setting of IPSec debug level
Lv.2 Details For R&D use
SP-LINK Mode setting at 1W sleep
Lv.1 Details Switch to execute 10base-T standby as default to realize the standby
power 1W in sleep mode.
Use case When shifting to sleep mode after negotiation (same as conventional
machines)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Shift to sleep mode with 10base-T
1: Shift to sleep mode after negotiation
Default value 0
LM-LEVEL Set of SMB client authentication method
Lv.1 Details To set the authentication method (LM, NTLMv1, NTLMv2) that the
SMB client uses for authentication.
In SMB authentication, authentication is generally made by
the authentication method with higher level, and if it fails, the
authentication level is lowered. (NLTMv2 => NLTMv1 => LM)
It is possible to limit the authentication level by setting 1 or 2 to avoid
using the authentication method with lower level.
Use case Upon user's request
Display/adj/set range 0 to 2
0: Authentication is made by LM, NTLMv1 and NTLMv2
1: Authentication is made by NTLMv1 and NTLMv2
2: Authentication is made by NTLMv2
Default value 0
Supplement/memo Windows NT LAN Manager authentication: A user authentication
method for network logon, which was generally used in the OS for
Windows NT Series prior to Windows NT 4.0
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
AFS-JOB Set of FAX server job reception port
Lv.1 Details To set the reception port of the fax server to which a fax client sends
jobs.
Use case When changing the job reception port of the fax server
Display/adj/set range 0 to 65535
Default value 20317
Related service mode COPIER> OPTION> NETWORK> AFC-EVNT
AFC-EVNT Set of FAX client event reception port
Lv.1 Details To set the event notification reception port of a fax client.
Use case When changing the event notification reception port of a fax client
Display/adj/set range 0 to 65535
Default value 29400
Related service mode COPIER> OPTION> NETWORK> AFS-JOB
ILOGMODE Setting of IP address block mode
Lv.1 Details To set all protocols or TCP/UDP/ICMP unicast as the target of IP
block.
When 0 is set, the machine responds to ARP, ICMP multicast and
broadcast which have no direct relation, and consequently the
number of logs is increased.
When 1 is set, the machine filters TCP, UDP and ICMP unicast only.
Use case Upon user's request
Adj/set/operate method 0 to 3
0: All protocols support mode
1: TCP/UDP/ICMP unicast support mode
2, 3: Not used
Default value 0
ILOGKEEP Set of IP address block log hold time
Lv.1 Details To set the retention time from the log time of IP block.
When access is made again from a same IP address which was
blocked before, if it is within the retention time of the previous log, its
log is not recorded.
If access is frequently made from a same IP address, the log record
of the UI might be filled with its logs. If the user considers that a
single log for a same IP address is enough, set the longer retention
time.
Use case Upon user's request
Display/adj/set range 0 to 48
0: 1 minute (special mode)
1 to 48: 1 hour to 48 hours
Default value 1
8-150
8-150