Canon imageRUNNER ADVANCE 6075 Series Service Manual page 496

4
Parts Replacement and Clearning > Image Formation System > Removing the Developing Drive Unit
6) Remove the Duct Unit.
• 3 Screws
• 1 Connector
• Harness
x3
7) Disconnect the Pre-transfer Charging High Voltage Connector.
• 1 Screw
4 Parts Replacement and Clearning > Image Formation System > Removing the Developing Drive Unit
8) Remove the Developing Drive Unit.
• 3 Connectors
• 1 Reuse Band
• 3 Screws
F-4-304
F-4-305
x3
x3
4-175
F-4-306
4-175