4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Main Drive Unit
Removing the Main Drive Unit
<Preparation>
1. Remove the Box Cover (Left). (Refer to "Removing the Vertical Path Cassette Pickup Drive
Unit")
2. Open the Controller Box. (Refer to "Removing the Vertical Path Cassette Pickup Drive
Unit")
3. Remove the Rear Lower Cover. (Refer to "Removing the Vertical Path Cassette Pickup
Drive Unit")
4. Remove the Waste Toner Container. (Refer to page 4-145)
5. Remove the Right Lower Cover. (Refer to "Removing the Cassettes 3 and 4 Pickup Unit")
6. Remove the Right Deck Pickup Unit. (Refer to page 4-216)
<Procedure>
1) Remove the Pre-registration Guide Unit.
• 2 Screws
x2
4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Main Drive Unit
2) Remove the Middle Vertical Path Guide.
• 1 Screw
3) Remove the 2 E-rings and move the bushings to remove the Vertical Path Rollers 1 and 2
in the direction of the arrow.
F-4-457
CAUTION:
Do not lose the bushings when removing the Vertical Path Rollers 1 and 2.
4-225
F-4-458
F-4-459
4-225