Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1221

12) Connect the Signal Cable (550mm; FK2-7826) and the Power Supply Cable (570mm;
FK2-7831) to Slot.1.
NOTE:
When connecting the Signal Cables, the side labeled "HDD1" should be connected to
the HDD.
x2
Power Supply Cable (570mm; FK2-7831)
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
Signal Cable (550mm; FK2-7826)
F-9-459
9 Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
13) Put the Signal Cable and the Power Supply Cable through [A] part.
14) Connect the 2 connectors of the Signal Cables and the Power Supply Cables to the
Encryption Board.
CAUTION:
When connecting the Signal Cables, the side labeled "ch.A"should be connected to
CH A on the board.
[A]
x2
9-224
Power Supply Cable Signal Cable
(570mm; FK2-7831) (550mm; FK2-7826)
CH A
F-9-460
9-224