Removing The Dc Controller Pcb - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > External Auxiliary System > Removing the DC Controller PCB

Removing the DC Controller PCB

<Preparation>
1. Remove the Box Cover (Left).
1-1) Remove the Harness.
• 2 Wire Saddles
1-2) Remove the Box Cover (Left).
• 1 Claw
• 1 Protrusion
4 Parts Replacement and Clearning > External Auxiliary System > Removing the DC Controller PCB
F-4-478
Claw
Projection
F-4-479
2. Open the Controller Box.
2-1) Disconnect the Reader Communication Cable.
2-2) Open the Controller Box in the direction of the arrow.
• 4 Screws
x4
4-231
F-4-480
F-4-481
4-231