Canon imageRUNNER ADVANCE 6075 Series Service Manual page 265

2
Technology > MEAP > Using USB Devices > USB Driver
Note:
You can display/check the used driver setting at "USB device report print" described
below regardless of whether it is registered from a manifest file or is registered from
API.
Availability for MEAP application of the USB device A (either HID keyboard or Mass Storage)
plugged to iR device
USB Setting
Registration
[Use MEAP Native System driver
status of USB
driver for USB application
device A
input device]
Not registered OFF YES
ON NO
Registered OFF NO
ON NO
YES: USB device available NO: USB device not available
Availability for MEAP applications of USB devices B and C (either HID keyboard or Mass
Storage) plugged to iR device
Setting to use
Registration
MEAP driver
status of USB Native
(Additional
USB device device application
Functions
B
mode)
Registered Not used B YES
(Native driver to
C YES
be used)
To be used B NO
C NO
Not Not used B NO
registered (Native driver to
C YES
be used)
To be used B NO
C NO
YES: USB device available NO: USB device not available
2 Technology > MEAP > Using USB Devices > USB Driver
MEAP application
System driver
Application with
not supported/
supported VID/PID declared
conventional
application in Manifest for x
application
YES NO
NO YES
NO YES YES
NO YES YES
MEAP application
System System driver Application
driver not supported with VID/PID
supported / conventional declared in
application application Manifest for B
YES NO
YES NO
NO YES
NO YES
NO YES YES
YES NO NO
NO YES YES
NO YES YES
● Specifications for the use of USB keyboards
Characters that could be entered on the software keyboard displayed on the conventional
control panel can be entered using a USB connected keyboard.
• When the software keyboard window is displayed, characters can be entered from the USB
keyboard (in-line entry not possible).
• When the software keyboard window is not displayed, entered characters will not be
remembered.
• The characters, which can be entered from a USB keyboard, is only a character, which can
be entered from the software keyboard.
• Even if characters are entered from the USB keyboard, the software keyboard window will
not change (the corresponding key does not invert or change color).
• Input from the USB keyboard can be accepted at the same time as input from the software
keyboard or numeric keys.
• Since the device supports Plug and Play, the USB keyboard can be disconnected/
connected freely. However, do not disconnect and connect during in deep sleep (when
in sleep with setting "low" at "the power consumption in sleep"). It is out of an operation
T-2-111
guarantee to disconnect and connect the USB keyboard in deep sleep.
• When USB device is attached to iR device, iR devices do not shift to deep sleep mode.
• Keyboard layout changes according to the keyboard layout settings in the Settings/
Registration screen. In addition, function keys and ten keys which are not displayed in the
software keyboard cannot be used. (Keyboard which the operation check was conducted
is 84-key Keyboard, but this does not mean that the operation of all 84-key Keyboards is
guaranteed.)
Note:
The factory shipment default setting is to enable the use of native (main unit
functionality) USB keyboards. Therefore, in order to use MEAP application keyboards,
[Use MEAP driver for USB input device] under [System management settings (initial
settings/ registration)] needs to be set to ON (factory shipment setting is OFF).
Operations change as described below in accordance with ON/ OFF settings.
• ON: when using MEAP application keyboard
• OFF: when using native (main unit functionality) keyboard (factory shipment default)
T-2-112
2-211
2-211