Canon imageRUNNER ADVANCE 6075 Series Service Manual page 540

4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Vertical Path Cassette Pickup Drive Unit
2. Open the Controller Box.
2-1) Disconnect the Reader Communication Cable.
2-2) Open the Controller Box in the direction of the arrow.
• 4 Screws
x4
4 Parts Replacement and Clearning > Pickup/Feed System > Removing the Vertical Path Cassette Pickup Drive Unit
3. Remove the Rear Lower Cover.
3-1)
• 3 Screws
F-4-437
4. Remove the Waste Toner Container. (Refer to page 4-145)
5. Remove the Cassette 3 and Cassette 4 Pickup Units. (Refer to page 4-217)
<Procedure>
1) Remove the 2 E-rings and move the bushings to remove the Vertical Path Rollers 3 and 4
in the direction of the arrow.
F-4-438
CAUTION:
Do not lose the bushings when removing the Roller Shaft.
Remove the Rear Lower Cover in the direction of the arrow.
x3
4-219
F-4-439
F-4-440
4-219