Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1203

15) Close the Controller Box.
CAUTION:
When closing the Controller Box, check that the LED Cable is not trapped or does not
contact with it.
16) Install the Rear Upper Cover.
NOTE:
Be sure to install the 3 TP screws show in the figure below.
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
17) Install the Side Cover.
• 2 hooks
• 1 Screw
18) Affix the LED Label.
F-9-431
19) Close the Right Rear Cover 1.
20) Return the Left Rear Cover to its original position, and secure the Reader Communication
Cable and the Reader Power Supply Cable in place using the Wire Saddles.
21) Connect the power plug to the outlet.
F-9-432
9 Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
9-206
Hook
Hook
F-9-433
F-9-434
9-206