Installing the Encryption Board
NOTE:
The following shows combination of the HDD and the Encryption Board.
•
Connect "CH A" to Slot.1 (The new HDD)
•
No HDD to Slot.2
B
C H
A
C H
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
Power Supply Cable
Signal Cable
Signal Cable
Power Supply Cable
F-9-448
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
1) Open the Controller Box, and free the Signal Cable and the Power Supply Cable of the
host machine from the 4 Wire Saddles and the Edge Saddle at the back of the HDD Case
Unit.
x5
9-220
F-9-449
9-220