Blank - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ BLANK

COPIER > ADJUST > BLANK
BLANK-T Adjustment of leading edge margin
Lv.1 Details To adjust the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0212 mm).
Use case - When reducing the margin upon user's request
- When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 1000
Unit 1 pixel
Appropriate target value 118
Default value 118
BLANK-L Adjustment of left edge margin
Lv.1 Details To adjust the margin on the left edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0212 mm).
Use case - When reducing the margin upon user's request
- When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1000
Unit 1 pixel
Appropriate target value 118
Default value 118
BLANK-R Adjustment of right edge margin
Lv.1 Details To adjust the margin on the right edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0212 mm).
Use case - When reducing the margin upon user's request
- When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1000
Unit 1 pixel
Appropriate target value 118
Default value 118
8
Service Mode > COPIER > ADJUST > BLANK
8 Service Mode > COPIER > ADJUST > BLANK
COPIER > ADJUST > BLANK
BLANK-B Adjustment of trailing edge margin
Lv.1 Details To adjust the margin on the trailing edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0212 mm).
Use case - When reducing the margin upon user's request
- When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1000
Unit 1 pixel
Appropriate target value 118
Default value 118
8-79
T-8-31
8-79