Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1267

4) Install the HDD Cover.
• 1 Claw
• 1 Screw (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP screw.
Claw
5) Install the HDD Handle.
• 2 Screws (TP Round End; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP screw.
x2
9
Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation P
6) Affix the HDD No.1 of the R-HDD Label to the handle of the Removable HDD.
7) Write down the serial number of the host machine to the label for recording the number,
F-9-536
8) Assemble the other Option HDD (250GB) in the same way according to steps 1) to 5).
9) Affix the HDD No.2 of the R-HDD Label to the handle of the Removable HDD.
10) Write down the serial number of the host machine to the label for recording the number,
F-9-537
9 Installation > [TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation P
and affix it to the area indicated in the figure.
and affix it to the area indicated in the figure.
Serial No.
9-270
HDD No.
Serial No.
XXXXXXXX
F-9-538
HDD No.
XXXXXXXX
F-9-539
9-270