Back-up of service mode
In factory setting, adjustments are made for each machine, and adjustment values are written
in the service label.
When you replaced the DC controller PCB, or executed the RAM clear function, adjustment
values for ADJUST or OPTION return to default. Therefore, when you made adjustments and
changed values of the Service Mode in the field, be sure to write down the changed values in
the service label. When there is no relevant field in the service label, write down the values in
a blank field.
8
Service Mode > Overview > Back-up of service mode
F-8-10
8
Service Mode > Overview > Back-up of service mode
8-7
8-7