Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1251

14) Insert the assembled Removable HDD.
CAUTION:
Be sure to insert the HDD No.1 to the Slot.1, and the HDD No.2 to the Slot.2.
Slot.2 (HDD2)
Slot.1 (HDD1)
15) Close the Controller Box.
CAUTION:
When closing the Controller Box, check that the LED Cable is not trapped or does not
contact with it.
9
Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
16) Install the Rear Upper Cover.
NOTE:
Be sure to install the 3 TP screws show in the figure below.
F-9-520
17) Install the Side Cover.
• 2 hooks
• 1 Screw
F-9-521
9 Installation > [TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Proce
9-254
F-9-522
Hook
Hook
F-9-523
9-254