Canon imageRUNNER ADVANCE 6075 Series Service Manual page 282

2
Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
3. Touch the numeric button [1] or [0] on the control panel (the setting value is changed to 1
or 0) and touch the [OK] button. (The data is reflected to the setting value field.)
NOTE:
E-RDS generates an alarm of service call completion at this timing, and sends the
alarm to UGW.
NOTE:
In the current condition, touching the [OK] button completes the service call regardless
of whether 0 or 1 is set.
● Steps for service call settings
1. Touch the [Counter Check] button on the control panel to display the counter check screen,
and touch the [Service Call] button.
2 Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
2. Touch the [Select/ Request] button.
CAUTION:
When a service call has been already requested, another service call cannot be sent.
F-2-334
The previous service call needs to be canceled, or a service person needs to perform
processing for service call completion.
3. Select the request details and touch the [Request] button.
NOTE:
E-RDS generates an alarm of service call request at this timing, and sends the alarm to
UGW.
F-2-335
2-228
F-2-336
F-2-337
2-228