Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1082

21) Install the Connector Case.
CAUTION:
When installing the Connector Cases, be sure to place the tie-wrap on the Card Reader
External Relay Harness on the inside of the Connector Cases.
9
Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
22) Secure the Card Reader External Relay Harness to the Cord Guide.
<In the Case of Upright Control Panel>
22-1) Remove the cover of Cord Guide, and affix it to the area indicated in the figure.
Tie-wrap
Tie-wrap
F-9-203
9 Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
9-85
F-9-204
9-85