Canon imageRUNNER ADVANCE 6075 Series Service Manual page 928

COPIER > OPTION > NETWORK
SSH-SW ON/OFF of SSH server function
Lv.2 Details To set ON/OFF of SSH server function.
Use case As needed (This mode is used for the Japanese models only and not
used with overseas models (outside Japan)).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo SSH: Secure Shell. A program for logging into other PC through
network, executing command from a remote PC, or moving files to
other PC. Data on network is encrypted, so that a series of operation
can be performed securely even through internet.
RMT-LGIN Set to allow remote login to SSH server
Lv.2 Details To set whether to allow remote login from the remote host (SSH
client: DA) to debug console of the SSH server.
Use case As needed (This mode is used for the Japanese models only and not
used with overseas models (outside Japan)).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution This item is enabled when the setting value of SSH-SW is ON.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Related service mode COPIER> OPTION> NETWORK> SSH-SW (Level 2)
Supplement/memo DA: Digital Accessory
RE-PKEY Regeneration setting of SSH server key
Lv.2 Details To set whether to regenerate the SSH server pair key at the start of
the machine.
With the setting to regenerate the key, the SSH server host
regenerates the pair key (private key/public key) at power-off/on,
output to key file and store in HDD.
Use case As needed (This mode is used for the Japanese models only and not
used with overseas models (outside Japan)).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - This item is enabled when the setting value of SSH-SW is ON.
- Start of the machine might be approx. 3 to 4 minutes longer than
the normal operation because regeneration process takes time.
Display/adj/set range 0 to 1
0: Not regenerated, 1: Generated
Default value 0
Related service mode COPIER > OPTION > NETWORK > SSH-SW (Level 2)
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
U-NAME Setting of SSH server login user name
Lv.2 Details To set the login user name which enables to connect to the SSH
server.
Only one user (host) is allowed to login.
Adj/set/operate method 1) Select the item, and select the entry field.
Keyboard is displayed.
2) Enter the character, and then press OK key.
Caution This is active when COPIER> OPTION> NETWORK> SSH-SW is 1
(ON).
Display/adj/set range 0 to 8 characters (1-byte alphanumeric characters)
Default value gN3Fp2A
Related service mode COPIER > OPTION > NETWORK > SSH-SW (Level 2)
U-PASWD Set user password for SSH server connect
Lv.2 Details To set user password required for connecting to the SSH server.
The entered characters are displayed as asterisks (*).
Adj/set/operate method 1) Select the item, and select the entry field.
Keyboard is displayed.
2) Enter the character, and then press OK key.
Caution This is active when COPIER> OPTION> NETWORK> SSH-SW is 1
(ON).
Display/adj/set range 0 to 8 characters (1-byte alphanumeric characters)
Default value Vs8DuwJ (Asterisks (*) are displayed on the screen.)
Related service mode COPIER > OPTION > NETWORK > SSH-SW (Level 2)
DA-PORT Port setting with DA
Lv.2 Details To set the communication port when DA is installed.
Select ON when DA is installed.
Use case When DA is installed (This mode is used for the Japanese models
only and not used with overseas models (outside Japan)).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When going through the following: COPIER > OPTION > NETWORK
> DA-CNCT, and selecting 1 for DA-CNCT, the following item is also
ON:
COPIER > OPTION > NETWORK > STS-PORT, CMD-PORT, DA-
PORT
Display/adj/set range 0 to 1
0: OFF, 1: ON (When installed)
Default value 0
Supplement/memo DA: Digital Accessory
8-146
8-146