Removing The Waste Toner Feed Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit

Removing the Waste Toner Feed Unit

<Preparation>
1. Remove the Box Cover (Left).
1-1) Remove the Harness.
• 2 Wire Saddles
1-2) Remove the Box Cover (Left).
• 1 Claw
• 1 Protrusion
4 Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Feed Unit
F-4-280
Claw
Projection
F-4-281
2. Open the Controller Box.
2-1) Disconnect the Reader Communication Cable.
2-2) Open the Controller Box in the direction of the arrow.
• 4 Screws
x4
4-168
F-4-282
F-4-283
4-168