Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1202

CAUTION:
If there is extra slack of the cables, be sure to tuck them to the host machine side.
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
14) Close the HDD Cap.
• 1 Screw
• 1 Rubber cap
CAUTION:
• Be sure that the cables do not protrude from the [A] part of the HDD Cap.
• If the cables protrude from the [A] part, allow extra slack of the cables at the [B] part
F-9-428
F-9-429
9 Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
and tuck them to the host machine side.
9-205
[A] [B]
F-9-430
9-205