Diagnosis Time - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2) Keep pressing the numeric keys (for approx. 20 seconds) until the following screen appears
on the Control Panel.
Note:
When this tool is not installed correctly, the following regular screen is displayed.
In this case, perform the following remedy.
Turn OFF the Main Power Supply Switch again, and execute step 1 and 2 shown
above.
If this tool still does not boot, it means that BCT is deleted. So, install BCT.
If BCT is not installed correctly, "--.--" is displayed in Service
Mode (COPIER>DISPLAY>VERSION>BCT) in the main body.
6
Troubleshooting > Controller Self Diagnosis > Controller System Error Diagnosis > Diagnosis Time
F-6-65
F-6-66
6 Troubleshooting > Controller Self Diagnosis > Controller System Error Diagnosis > Diagnosis Time

■ Diagnosis Time

Diagnosis is completed in approx. 3 minutes.
The result is displayed on the Control Panel.
<When the diagnosis result is normal>
<When an error is detected by diagnosis>
Detailed information is displayed under the judgment result. In detailed information, the name
of the test where an error was detected is indicated.
<How to view the error result>
The following screen is an enlarged view of the detailed information indicated above.
Explanation of the detailed error information is described.
6-35
F-6-67
F-6-68
F-6-69
6-35