Canon imageRUNNER ADVANCE 6075 Series Service Manual page 470

4
Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Shutter Unit
7) Install the Shield Plate (Left).
• 2 Screws
CAUTION:
Do not make the Leaf Spring caught by the Charging Wire when removing the Primary
Charging Shutter Unit.
8) Remove the Primary Charging Shutter Unit.
• 2 Screws
4 Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Shutter Unit
<Installation Method>
CAUTION:Points to Caution at Installation
Be careful not to get the Leaf Spring caught by the Charging Wire to install it to the
Cleaner Claw.
NOTE:
The Shield Plate does not need to be removed when installing the Shutter Unit.
1) Set the Leaf Spring of the Primary Charging Shutter to the Cleaner Claw.
F-4-216
2) Install the Primary Charging Shutter Unit.
• 2 Screws
3) Return the Primary Charging Wire Cleaners (Left and Right) to the original position.
x2
F-4-217
4-149
4-149